Our new CBA kit now includes the ability to test for oxygen! In addition, a new Nextteq® regulator and flow meter system is included to work with the Nextteq® CBA tubes.
Quality is key and our new regulator and flow meter system is no exception. The flow meter comes with a calibration chart prepared by comparing the flow meter to a calibrator. Use of the chart will improve the accuracy of the set flows, especially at the lower end of the flow meter scale. Flow meters tend to be more accurate a higher flow rates than they are at lower flow rates. The calibration chart will allow for more accurate readings for all of the tubes included in the CBA kit.
Testing is made simple! Once you attach the regulator to an air bottle or you adapt it to an air supply manifold, follow the 3 steps below for all tubes except O₂:
For an accurate reading of O₂, you will be using a syringe kit with included instructions. The syringe is used to precisely monitor the volume of 50cc sample air.
For more information, contact Nextteq Customer Service Team at 813-249-5888 or toll free at 877-312-2333.
For technical questions, ask to speak to Dr. Duffy, VP of Technical Development / Industrial Hygiene Manager.
©2023 Nextteq International LLC. All rights reserved. Nextteq, Nextteq logo, NXI, NXI logo, VeriFit, VeriAir Flex, VeriAir, Multi-teq, and ReadyGo are a registered trademarks of Nextteq International LLC. All other brand names and trademarks mentioned in this document are the properties of their respective holders. All features, specifications, and prices are subject to change without notice.
Legal Notice & Privacy Policy | Content Copyright ©2023