Gastec® Accessories

Gastec® GV-100 Accessories

Accessory Description

> Extension Hoses

Rubber Shroud Tube Holder

P/N 357

5-Meter Extension Hose

P/N 351A-5

10-Meter Extension Hose

P/N 351A-10

Gastec® Extension Hoses (5m (16.4 ft) and 10m (32.8 ft)) easily screw onto GV-100 gas sampling pump and safely enable efficient remote sampling of gases by non-technical personnel. No tools are required for assembly. All Gastec extension hoses have a narrow diameter to fit into tight spaces and are constructed of synthetic rubber for flexibility, strength, and durability. The convenient 5 and 10-meter hose design eliminates the need for you to factor in hose line air volume when sampling. Sample results can be read directly from the detector tube; no additional calculations, charts or correction factors are required.

> Telescoping Extension Pole

P/N 350BP

With the adjustable and rigid telescoping extension pole, one person can easily conduct testing in any direction. Many times industrial hygienists and safety professionals are faced with testing in confined spaces that are not accessed from the top. Even with topside entry, it is advantageous at times to conduct testing at angles other than vertical. Remote testing at angles, horizontally or even vertically upward is possible at distances over 6 ft. (2 meters) away. Made of non-conductive, corrosion-resistant fiberglass, the pole is lightweight and rugged.

> Deluxe Tube Tip Breaker

P/N 722

The Gastec® Deluxe Tube Tip Breaker offers a detector tube tip breaker with a durable diamond cutting edge. Discarded tips are deposited directly into a built-in storage bin, preventing glass fragments from scattering and improving safety. It is reusable and holds up to 260 broken tips. Small and durable, the Deluxe Tube Tip Breaker easily fits in the gas sampling pump carrying case or in your pocket.

> One Hand Adapter

P/N GV-700

The Gastec® One Hand Operation Adapter is ideal for sampling in hard-to-reach places, such as over vats and from a ladder. With the One Hand Operation Adapter and the tube inserted into the pump, the pump handle can be drawn back and locked while maintaining the pump vacuum without taking a sample. When you are ready, the pump can be activated and the sample taken with just the push of a button.

> Pyrotec Pyrolyzer

P/N 840

Quantitatively measure chlorofluorocarbons (CFCs) such as Freon—on-the-spot The Gastec® Pyrotec Pyrolyzer System has made monitoring chlorofluorocarbons, halogenated hydrocarbons, nitroparaffins, anesthetic gases, and other hard-to-detect compounds easy and economical by combining detector tube technology with a portable pyrolyzer. The sample is first pyrolyzed (decomposed by heat) then the by-product is measured using a pre-calibrated, direct-reading detector tube. The Gastec Pyrotec Pyrolyzer System is small (3 1/4 inches long with a 1 1/2 inch diameter) and lightweight (only 7 ounces), and conveniently screws onto the front of the Gastec Gas Sampling Pump, by hand, in a matter of seconds.

> Hot Air Probe

Hot Air Probe
P/N 340

Hot Air Probe Holder

P/N 345A

Most detector tubes are designed to be used at temperatures in the range of 32 ̊ – 104 ̊F (0-40 ̊C). However, some samples such as flue gases, stack emissions and automotive exhaust are at elevated temperatures. The Hot Probe rapidly cools samples as hot as 1112 ̊F (600 ̊C) down to an ambient temperature before the sample enters the detector tube. The hot probe holder provides horizontal and vertical support for the tube and hot probe. No tools are required for assembly.